您有任何疑问,请与我们联系
上海标恒电子科技有限公司
上海总部
地址:上海市广富林路699弄20号1722室
电 话:
021-52161505
021-52918515
联系人:李晓诺 13818902378
E-mail:lxn@ok17.net
深圳办事处:广东 广西 福建
地 址:深圳市宝安41区
市场部电话: 13818902378
联系人: 李先生
欧宝电气超绝缘引下线系统
- 仪器名称:超绝缘引下线系统
- 仪器品牌:欧宝电气
- 仪器型号:
- 送货时间:48小时内
- 标准价格:不详
- 本站售价:洽询
- 关键参数:产品描述 超绝缘引下线系统通过采用高度绝缘的引下线,提供了相当于750mm空气和1500mm混凝土的绝缘距离,保证对周围设备的保护。 特别适用于独立避雷针系统,将雷电电流有效的分离开,确保外部防雷系统不会与周围设备发生绝缘击穿。
性能参数介绍
软件下载: 无
资料下载: 无
产品介绍
超绝缘引下线系统
产品描述
超绝缘引下线系统通过采用高度绝缘的引下线,提供了相当于750mm空气和1500mm混凝土的绝缘距离,保证对周围设备的保护。
特别适用于独立避雷针系统,将雷电电流有效的分离开,确保外部防雷系统不会与周围设备发生绝缘击穿。
The complex contours of metallic
and electrical units protruding
above the roof make particular
demands of lightning protection
and compliance with the separating
distance.
Creating a separating distance
With the OBO insulated lightning
protection, you can erect separate
interception devices safely, economically
and in accordance with
standards. The core of the system
is an insulating, fibre glass-reinforced
plastic rod, which creates
the separating distance safely and
prevents uncontrolled arcing and
dangerous spark creation.
This means that no partial lightning
currents can enter the building.
Two material thicknesses for different
applications
The insulated lightning protection
system consists of GFK rods with
a diameter of 16 or
the following properties:
• Up to
• UV-stable
• Light grey
• Material factor km: 0.7
• Load torque: >
• Support load: 54 N (
• Up to
• UV-stable
• Light grey
• Material factor km: 0.7
• Load torque: >
• Support load: 105 N (
There is a comprehensive range of
system accessories available for
both variants.
Particularly simple mounting
through pre-terminated sets
Besides the modular products, we
can offer you pre-installed sets for
standard installation requirements:
• Set with two fastening plates
• Set with wall connection brackets
• Set for fastening on folds
• Set for fastening on pipes
Iso-combination set for 3-corner
fastening
Iso-combination set for 3-corner
fastening for the erection of an insulated
interception system at a
safe separating distance (s).
For mounting on walls and roof
structures with two fastening plates.
To accept interception rods
and round cables of 8, 16 and
• Type: 101 3-ES-16
• Article No. 5408976
• L =
• H =
Iso-combination set for V fastening
Iso-combination set for fold fastening
for the erection of an insulated
interception system at a safe separating
distance (s) of up to
of supports and roof structures
with folding clamps of a folding
thickness of up to
interception rods and round
cables of 8, 16 and
• Type: 101 VS-16
• Article No. 5408978
• L =
Iso-combination set for fold fastening
Iso-combination set for fold fastening
for the erection of an insulated
interception system at a safe separating
distance (s). For mounting
on the fold of supports and roof
structures with folding clamps with
a folding thickness of up to
rods and round cables of 8, 16
and
• Type: 101 FS-16
• Article No. 5408980
• L =
Iso-combination set for pipe V
fastening
Iso-combination set for pipe V fastening
for the erection of an insulated
interception system at a safe
separating distance (s). For mounting
on pipes with two pipe clamps.
To accept interception rods and
round cables of 8, 16 and
diameter.
• Type: 101 RVS-16
• Article No. 5408982
• L =
Quickly and simply installed
The OBO isFang modular interception
rod system can offer a fast
and freely terminable solution for
insulated interception rod systems,
as well as high interception rods
for the largest possible protection
angle.
Insulated variant
The insulated interception rods
protect electrical and metallic roof
structures, taking the calculated
separating distance (s), according
to VDE 0185-305-3 (IEC 62305-3),
into account. An insulated section
of 1.5 metres made of fibre-glass
reinforced plastic (GFK) ensures
sufficient distance to all roof structures.
Even complex building structures
can be protected by the
comprehensive system accessories.
Aluminium variant
The 3-part interception rods of between
4 and 8 metres and made
of aluminium complement the conventional
interception system made
of interception rod and block,
which is used for heights of up to
4 metres. Various brackets
for mounting on walls, pipes and
corner pipes, as well as two tripod
stands with different spreading
widths, are available to fasten the
various interception rods.
Simple erection of the tripod stand: position
the blocks...
... open up the stand... ... and screw to the FangFix concrete blocks.
Please not that the number of
FangFix blocks required may vary
according to the wind strength.
Arrangement of isFang system (in wind load zone 2)
Height of interception
rod, aluminium
Height of insulated
interception rod,
material GFK/VA
Spreading width,
tripod stand
Amount of Fang-
Fix concrete
blocks
wind load zone 2
Amount of FangFix
edge protection Length of threaded
rod
Art. No. 5408942
Art. No. 5408968
3 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408971
Art. No. 5402864
Art. No. 5408968
3 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408971
Art. No. 5402866
Art. No. 5408968
3 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408971
Art. No. 5408946
Art. No. 5408968
6 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408972
Art. No. 5402868
Art. No. 5408968
6 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408972
Art. No. 5402870
Art. No. 5408968
6 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408972
Art. No. 5402872
Art. No. 5408969
6 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408972
Art. No. 5402874
Art. No. 5408969
6 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408972
Art. No. 5402876
Art. No. 5408969
6 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408972
Art. No. 5402878
Art. No. 5408969
9 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408973
Art. No. 5402880
Art. No. 5408969
9 blocks
Art. No. 5403227
3 x edge protection
Art. No. 5403235
Art. No. 5408973
Delivered on a disposable cable reel Simple insulation removal Simple termination
Total flexibility on the construction
site
The OBO isCon® cable can be
used flexibly. It is supplied on disposable
cable reels, sold by
the metre. The length of the individual
arrester and the termination
of the connection is made on site.
This means: no ordering of pre-terminated
cables, but rather flexible
working according to actual conditions
on the construction site. Special
knowledge is required to be
able carry out the planning and
routing of the isCon® correctly.
This knowledge is imparted by the
current installation instructions, but
can also be deepened in special
OBO workshops.
Structure of the isCon® cable
The OBO isCon® cable consists
of five parts. The copper core has
a cross-section of
least
is surrounded by an internal conductive
layer and a high voltage-resistant
VPE insulation. In turn, this
is surrounded by an external conductive
layer and with an additional
weakly conductive material. The
lightning current flows through the
copper core. For operation, the
copper core must be connected to
the weakly conductive jacket using
a connection element.
Design of the conductor
The routing of the isCon® cable
must be planned and executed
according to the current mounting
and installation instructions.
Maximum length of isCon® cable for s =
LPS – lightning protection class Maximum length of the isCon® cable
I
II
III + IV
Protection of roof structures
Insulated interception rods and a
range of fastening clips allow
space-saving protection of different
building structures and roof structures.
Easy refitting and combination
with existing lightning protection
systems
Roof installations and antennas installed
later must be integrated into
an existing lightning protection
system. In so doing, separating
distances which cannot be maintained
rapidly become a problem.
The isCon® cable replaces this
distance by up to 0.75 metres.
α° = lightning protection angle, s = separating distance 1 = lightning protection angle α°, 2 = ridge height h in mm, 3 = lightning protection classes I/II/III/
IV
Protective angle method for roof
structures
You have protected the flat-roofed
building correctly according to the
standard VDE 0185-305 (IEC
62305). You must now protect all
roof structures with interception
rods. This involves observing the
separating distance (s).
If the roof structure has a conductive
continuation into the building
(e.g. with a stainless steel pipe
with a connection to the ventilation
or air conditioning system), then
the separating distance (s) must
always be maintained. The interception
rod must be erected at a
certain distance from the building
to be protected. This distance
safely prevents arcing of the lightning
current and dangerous spark
creation.
Roof structures with an individual
interception rod
The protective angle for lightning
rods varies according to lightning
protection class. You can find the
protective angle (a) in the table for
the most common interception
rods of up to
Protective angle according to lightning protection class according to VDE 0185-305 (IEC 62305)
Lightning protection class Protection angle α for interception rods to
I 70°
II 72°
III 76°
IV 79°
p = penetration depth, R = radius of the lightning sphere, d = distance of the interception system
Formula for calculating the penetration depth
(p)
Roof structures with multiple interception
rods
If you use several interception rods
to protect an object, you must take
into consideration the penetration
depth between them. For a precise
calculation, use the following formula:
Penetration depth according to the lightning protection class according to VDE 0185-305 (IEC 62305)
Distance of interception
system
(d) in m
Penetration depth
Lightning protection
class I lightning protection
sphere: R =
Penetration depth Lightning
protection class II
lightning protection
sphere: R =
Penetration depth Lightning
protection class III
lightning protection
sphere: R =
Penetration depth Lightning
protection class IV
lightning protection
sphere: R =
2 0.03 0.02 0.01 0.01
3 0.06 0.04 0.03 0.02
4 0.10 0.07 0.04 0.04
5 0.16 0.10 0.07 0.05
10 0.64 0.42 0.28 0.21
15 1.46 0.96 0.63 0.47
20 2.68 1.72 1.13 0.84
Insulated lightning protection set, 3-corner fastening
With M10 bolts
3-corner fastening: For an insulated interceptor unit at the separation distance, see mounting on
walls and roof structures with two fastening plates. Seat for interception rods and round conductors
of 8, 16 and
101 3-ES-16
Type
Ø mm
Dimension
D
16
mm
Dimension
L
750
mm
Dimension
H
1500
5408 97 6
Item no.
207.100
kg/100 pc.
Weight
1
Units
Pack
Insulated lightning protection set, V fastening
With M10 bolts
V fastening: For an insulated interceptor unit at the separation distance, see mounting on walls
and roof structures with two wall connection brackets. To accept interception rods and round
conductors of 8, 16 and
101 VS-16
Type
Ø mm
Dimension
D
16
mm
Dimension
L
750
5408 97 8
Item no.
201.800
kg/100 pc.
Weight
1
Units
Pack
Insulated lightning protection set, FS fastening
With M10 bolts
Fold fastening: For an insulated interceptor unit at the separation distance, see mounting on
folds with fold thicknesses of up to
of 8, 16 and
101 FS-16
Type
Ø mm
Dimension
D
16
mm
Dimension
L
750
5408 98 0
Item no.
235.500
kg/100 pc.
Weight
1
Units
Pack
Insulated lightning protection set, VRS fastening
With M10 bolts
Pipe V fastening: For an insulated interceptor unit at the separation distance, see mounting on
pipes with two pipe clips. To accept interception rods and round conductors of 8, 16 and
101 VRS-16
Type
Ø mm
Dimension
D
16
mm
Dimension
L
750
5408 98 2
Item no.
209.400
kg/100 pc.
Weight
1
Units
Pack
Insulating rod
With M10 bolts
To erect insulated interception devices to VDE 0185-305 (IEC 62305), km = 0.7.
101 20-3000
Type
mm
Nominal
size Ø
20
mm
Length
3000
5408 10 5
Item no.
190.000
kg/100 pc.
Weight
5
Units
Pack
101 20-6000 20 6000 5 380.000 5408 14 8
101 16-750 16 750 5 30.000 5408 10 7
101 16-1500 16 1500 5 60.000 5408 10 8
101 16-3000 16 3000 5 120.000 5408 10 9
T connector
With M10 bolts
T connector for installation of insulation rods.
101 IT
Type
mm
dimension
d Ø
20
mm
Length
65
Ø mm
Dimension
D
40
Product additional text 1
With M10 bolts
5408 15 6
Item no.
20.000
kg/100 pc.
Weight
10
Units
Pack
101 IT-16 16 60 30 With M10 bolts 10 11.475 5408 15 8
K connector
With M10 bolts
K connector for installation of insulation rods.
101 IK
Type
mm
dimension
d Ø
20
mm
Length
100
Ø mm
Dimension
D
40
Product additional text 1
With M10 bolts
5408 29 6
Item no.
20.000
kg/100 pc.
Weight
10
Units
Pack
101 IK-16 16 100 30 With M10 bolts 10 27.090 5408 29 8
DK connector
With M10 bolts
DK connector link for installing insulation rods type 101 I.
101 IDK
Type
mm
dimension
d Ø
20
mm
Length
125
Ø mm
Dimension
D
40
Product additional text 1
With M10 bolts
5408 24 5
Item no.
40.000
kg/100 pc.
Weight
10
Units
Pack
101 IDK-16 16 125 30 With M10 bolts 10 25.990 5408 24 7
Wall connection
With M10 bolts
With female thread M8 for installing insulating rods to structures or walls.
101 IW-M10
Type
mm
dimension
d Ø
20
mm
Length
60
Ø mm
Dimension
D
40
Product additional text 1
With M10 bolts
5408 68 7
Item no.
20.000
kg/100 pc.
Weight
10
Units
Pack
101 W-16 16 60 30 With M10 bolts 10 14.200 5408 68 9
End piece
With M10 bolts
End piece for attaching round conductors Rd 8-10 and interception tips, type 101 ISP.
101 IES
Type
mm
dimension
d Ø
20
mm
Length
60
Ø mm
Dimension
D
35
Product additional text 1
With M10 bolts
5408 39 3
Item no.
20.000
kg/100 pc.
Weight
10
Units
Pack
101 IES-16 16 60 30 With M10 bolts 10 10.000 5408 39 5
Connection piece
With M10 bolts
Fitting with M16 thread for installation on stands with M16 female thread.
Type
mm
dimension
d Ø
20
mm
Length
60
Ø mm
Dimension
D
40
Product additional text 1
With M10 bolts
5408 35 0
Item no.
20.000
kg/100 pc.
Weight
10
Units
Pack
Connection joint
With M10 bolts
Attaching joint for installation on concrete stones with thread M16 on slanting roof surfaces.
101 IAG
Type
mm
dimension
d Ø
20
mm
Length
107
Ø mm
Dimension
D
40
Product additional text 1
With M10 bolts
5408 50 4
Item no.
40.000
kg/100 pc.
Weight
10
Units
Pack
101 IAG-16 16 107 30 With M10 bolts 10 27.160 5408 50 6
Articulated connector
With M10 bolts
Connector for installation of insulation pipes.
101 IGL
Type
mm
dimension
d Ø
20
mm
Length
127
Ø mm
Dimension
D
40
Product additional text 1
With M10 bolts
5408 62 8
Item no.
40.000
kg/100 pc.
Weight
10
Units
Pack
101 IGL-16 16 127 30 With M10 bolts 10 32.000 5408 63 0
Extension
With M10 bolts
Extension of insulating rods.
101 IV
Type
mm
dimension
d Ø
20
mm
Length
60
Ø mm
Dimension
D
40
Product additional text 1
With M10 bolts
5408 55 5
Item no.
20.000
kg/100 pc.
Weight
10
Units
Pack
101 IV-16 16 60 30 With M10 bolts 10 16.000 5408 55 7
FangFix reducing sleeve
Reduces the drill hole of the FangFix block from Ø
of GFK insulating rods of Ø
101 RH-16
Type
Colour
Black
mm
Fit
16
5408 10 1
Item no.
0.190
kg/100 pc.
Weight
25
Units
Pack
Rod holders
With female thread M8 or through hole Ø
113 Z-20
Type
Material
Zn
mm
Fit
Rd 20
5230 52 7
Item no.
6.450
kg/100 pc.
Weight
100
Units
Pack
Fastening plate
With M10 bolts
To mount insulating rods on constructions or walls.
Plate made of VA stainless steel.
Holder and crosspiece for 16 and
101 BP-16
Type
mm
Length
175
mm
Dimension
B
40
mm
Dimension
H
42
5408 98 4
Item no.
21.200
kg/100 pc.
Weight
1
Units
Pack
Wall connection, angled
With M10 bolts
Wall connection for GFK rods, dimension D Ø:
101 WG-16
Type
mm
dimension
d Ø
16
mm
Dimension
L
110
Ø mm
Dimension
D
30
5408 98 6
Item no.
27.960
kg/100 pc.
Weight
1
Units
Pack
Fastening bolt
With M10 bolts
For GFK rods, dimension D Ø:
101 BB-16
Type
mm
dimension
d Ø
16
mm
Dimension
L
40
Ø mm
Dimension
D
30
5408 98 8
Item no.
13.920
kg/100 pc.
Weight
1
Units
Pack
Holder, V support
With M10 bolts
Rod holder to accept two GFK rods, dimension D Ø:
101 HV-16
Type
mm
dimension
d Ø
16
mm
Dimension
L
90
mm
Dimension
H
55
mm
Dimension
B
48
5408 99 0
Item no.
50.700
kg/100 pc.
Weight
1
Units
Pack
Fold fastening
With M10 bolts
To fasten a GFK rod on constructions of 4 to
Type
mm
dimension
d Ø
16
mm
Dimension
L
121
Ø mm
Dimension
D
30
5408 99 2
Item no.
45.120
kg/100 pc.
Weight
1
Units
Pack
Pipe fastening
With M10 bolts
For pipe fastening of a GFK rod using tightening strap, dimension D Ø:
101 R-16
Type
mm
dimension
d Ø
16
mm
Dimension
L
81
Ø mm
Dimension
D
30
mm
Dimension
B
96
5408 99 4
Item no.
26.830
kg/100 pc.
Weight
1
Units
Pack
Multi-Adapter
With M10 bolts
Connector for two GFK rods, dimension D Ø:
101 MA-16
Type
mm
dimension
d Ø
16
mm
Dimension
L
91
Ø mm
Dimension
D
30
mm
Dimension
B
40
5408 99 6
Item no.
36.280
kg/100 pc.
Weight
1
Units
Pack
Interception tip
With M10 bolts
Interception tip for attaching to end piece, Type 101 IES, with M10 thread.
101 ISP M10
Type
mm
Length
110
5408 45 8
Item no.
10.000
kg/100 pc.
Weight
10
Units
Pack
Adjustable insulating beam − pipe
Variable spacer for cables and interception rods to maintain the separation distance.
• Infinitely adjustable distance range (L = 550−
• Made of fibre glass-reinforced plastic (km = 0.7)
• For pipe mounting (including
ISAV1000R
Type
5408 84 9
Item no.
130.000
kg/100 pc.
Weight
1
Units
Pack
Adjustable insulating beam − wall
Variable spacer for cables and interception rods to maintain the separation distance.
• Infinitely adjustable distance range (L = 550−
• Made of fibre glass-reinforced plastic (km = 0.7)
• For wall mounting with 10
ISAV1000W
Type
5408 85 2
Item no.
130.000
kg/100 pc.
Weight
1
Units
Pack
isFang interception rod stand
Tripod stand for screwless installation of freestanding interceptor rods and insulated interception
rods with
plinths as well as threaded rods should be ordered separately.
isFang 3B-100
Type
mm
Dimension
B
1000
Ø mm
Dimension
D
40
mm
Dimension
L
—
mm
Dimension
H
—
5408 96 8
Item no.
620.000
kg/100 pc.
Weight
1
Units
Pack
isFang 3B-150 1500 40 — — 1 950.000 5408 96 9
isFang interception rod
Tapered interception rod for isFang tripod stand.
101 3B-4000
Type
mm
Nominal
size Ø
40/ 16/ 10
mm
Dimension
B
2000
mm
Dimension
D
1000
mm
Dimension
H
1000
mm
Length
4000
5402 86 4
Item no.
400.000
kg/100 pc.
Weight
1
Units
Pack
101 3B-4500 40/ 16/ 10 2500 1000 1000 4500 1 480.000 5402 86 6
101 3B-5000 40/ 16/ 10 3000 1000 1000 5000 1 550.000 5402 86 8
101 3B-5500 40/ 16/ 10 3500 1000 1000 5500 1 630.000 5402 87 0
101 3B-6000 40/ 16/ 10 4000 1000 1000 6000 1 700.000 5402 87 2
101 3B-6500 40/ 16/ 10 4500 1000 1000 6500 1 780.000 5402 87 4
101 3B-7000 40/ 16/ 10 5000 1000 1000 7000 1 850.000 5402 87 6
101 3B-7500 40/ 16/ 10 5500 1000 1000 7500 1 930.000 5402 87 8
101 3B-8000 40/ 16/ 10 5500 1500 1000 8000 1 1000.000 5402 88 0
isFang-3B threaded rod
Threaded rod to fasten 1, 2 or 3 FangFix concrete bases with tripod stand. To mount the threaded
rods, the edge protection must be drilled.
isFang 3B-G1
Type
mm
Dimension
L
270
5408 97 1
Item no.
48.000
kg/100 pc.
Weight
3
Units
Pack
isFang 3B-G2 340 3 60.400 5408 97 2
isFang 3B-G3 430 3 76.600 5408 97 3
Concrete block for FangFix-System
•
• Concrete, frost-resistant
• Stackable
F-FIX-S16
Type
5403 22 7
Item no.
1700.000
kg/100 pc.
Weight
1
Units
Pack
Basis for FangFix system
Edge protection with integrated dowel (basic) suitable for FangFix system.
F-FIX-B16
Type
5403 23 5
Item no.
12.600
kg/100 pc.
Weight
10
Units
Pack
Interception rod holder for sloping roof
Stand system: rod holder for sloping roofs, for simple, quick and secure fastening of Ø
interception rods.
• System consists of a bracket made of V
• Quick and easy mounting
• Adjustable angle
• In the case of high interception rods (>
necessary
SD-Fix
Type
5403 33 5
Item no.
81.000
kg/100 pc.
Weight
1
Units
Pack
Interception rod holder for ridge tiles
Rod holder for ridge tiles, for simple, quick and safe fastening of Ø
• System consisting of holder made of V
• Quick and easy mounting thanks to pre-mounted interception rod
• Interception rod length:
• Width adjustable between 180−
• Spacing of the ridge holders:
Application: To protect roof structures such as photovoltaic and TV/SAT systems.
F-FIX-132
Type
5403 33 0
Item no.
62.000
kg/100 pc.
Weight
1
Units
Pack
isCon® conductor
Surface discharge-free and high voltage-resistant insulated conductor to maintain the separation
distance according to IEC 62305.
Equivalent separation distance s ≤
Please refer to the mounting instructions for information on routing the OBO isCon® cable.
isCon 750 SW
Type
Material
—
mm²
Cross–
section
35
mm
Nominal
size Ø
23
ca. m
Normal
ring
25
5408 00 2
Item no.
69.400
kg/
Weight
25
m
Pack
isCon 750 SW — 35 23 100 100 69.400 5408 00 4
Insulation removal pliers
Pliers to remove the insulation of the OBO isCon® cable.
isCon stripper
Type
5408 00 9
Item no.
138.000
kg/100 pc.
Weight
1
Units
Pack
Spare blade
Replacement blade for isCon® insulation removal pliers.
isCon cut
Type
Material
—
Dimension
Ø mm
Dimension
D
—
5408 01 1
Item no.
0.000
kg/100 pc.
Weight
5
Units
Pack
Connection element
Screw-on termination of the connection for the isCon® cable.
Including heat-shrinkable sleeve and screw lock.
isCon connect
Type
Material
V
Ø mm
Dimension
D
23
mm
Fit
10
5408 02 2
Item no.
21.500
kg/100 pc.
Weight
2
Units
Pack
Potential connection
Potential control to avoid surface discharges on the isCon® cable. Installation takes place after
the first 1.5 metres.
isCon PAE
Type
Material
V
Ø mm
Dimension
D
—
mm
Fit
ø 17
5408 03 6
Item no.
36.500
kg/100 pc.
Weight
2
Units
Pack
Potential connection terminal for mounting on isFang
Potential connection for isCon® cable for mounting on insulated interception rods of type is-
Fang.
927 2 6-K
Type
Material
V
Ø mm
Dimension
D
—
mm
Fit
3/8-4"
5057 59 9
Item no.
5.500
kg/100 pc.
Weight
10
Units
Pack
VA cable bracket
Cable brackets for isCon® cable for mounting on roof/wall structures.
isCon H VA
Type
Material
V
Ø mm
Dimension
D
23
5408 05 6
Item no.
2.850
kg/100 pc.
Weight
50
Units
Pack
starQuick cable bracket PA
Cable brackets for isCon® cables for mounting on the building structure. Can also be used in
the first
Can be arranged next to each other and are made from a UV and weather-resistant polyamide.
SQ-20 SW
Type
Colour
Jet black
mm
Dimension
A
29
mm
Dimension
B
17
2146 16 4
Item no.
0.848
kg/100 pc.
Weight
50
Units
Pac
starQuick nut M6
The starQuick nut was developed especially for the starQuick clip. Simply push into the intended
opening of the starQuick. The starQuick nut is captive in the clip. Suitable for M6/M8 threads.
SQ M6
Type
Thread
M6
mm
Dimension
L
15
mm
Dimension
h
5
mm
Dimension
t
4
Colour
Light grey
Units
Shipping
box
12000
2146 50 9
Item no.
0.070
kg/100 pc.
Weight
100
Units
Pack
starQuick anchor M6
Suitable for concrete, calcareous sandstone, brick or porous concrete masonry with interplay of
the starQuick clip and starQuick nut.
SQ PP
Type
mm
Dowel Ø
6
mm
Length
30
mm
Drill hole
Ø
6
mm
Bore
hole
depth
35
Units
Shipping
box
6000
2351 70 6
Item no.
0.100
kg/100 pc.
Weight
50
Units
Pack
VA cable bracket with tightening strap
Cable brackets for isCon® cable for pipe mounting on
isCon HS VA
Type
Material
V
Ø mm
Dimension
D
23
5408 05 2
Item no.
0.000
kg/100 pc.
Weight
10
Units
Pack
PA cable bracket with tightening strap
Cable brackets for isCon® cable for pipe mounting on
isCon HS PA
Type
Material
PA
Dimension
ø
Ø mm
Dimension
D
23
5408 05 4
Item no.
23.100
kg/100 pc.
Weight
10
Units
Pack
Flat roof cable holder
Universal adapter with drill hole Ø
(L = depending on application), for fastening to 165/MBG.
165 MBG UH
Type
mm
Fit
Rd 8
Colour
Black
5218 88 2
Item no.
0.280
kg/100 pc.
Weight
25
Units
Pack
M-Quick cable bracket PA
Multi-quick metric
Simple fastening
Secure locking
Radial arrangement
Simplified storage
Universally applicable
M-Quick M25 SW
Type
mm
Clamping
range D
-2250
N
Pull-out
value
50
Colour
Jet black
2153 78 7
Item no.
0.930
kg/100 pc.
Weight
50
Units
Pack
VA roof cable holder, sloping roof
To route the isCon® cable on pitched roofs.
isCon H280 VA
Type
Material
V
mm
Installation
height
55
Ø mm
Dimension
D
23
5408 04 7
Item no.
16.100
kg/100 pc.
Weight
25
Units
Pack
PA roof cable holder, sloping roof
To route the isCon® cable on pitched roofs.
isCon H280 PA
Type
Material
PA
Dimension
Ø mm
Dimension
D
23
5408 04 9
Item no.
13.950
kg/100 pc.
Weight
25
Units
Pack
Spacer
For stand-off installation of the isCon® cable in the area of the connection. Incl. reducing sleeve
for mounting on FangFix concrete block
isCon DH
Type
Material
GFK
Ø mm
Dimension
D
23
5408 04 3
Item no.
41.400
kg/100 pc.
Weight
2
Units
Pack
Connection plate for one isCon® cable
Connection plate to connect an isCon® cable with interception rod Ø
isCon AP1-16 VA
Type
Material
V
Ø mm
Dimension
D
—
5408 02 6
Item no.
27.400
kg/100 pc.
Weight
1
Units
Pack
Connection plate for two isCon® cables
Connection plate to connect two isCon® cables with interception rod Ø
isCon AP2-16 VA
Type
Material
V
Dimension
16x8
Ø mm
Dimension
D
—
5408 02 8
Item no.
39.500
kg/100 pc.
Weight
1
Units
Pack
Strip clip for fastening the isCon® cable to insulated interception
rods
For quick fixing
555 7.6x380 SW
Type
mm
Dimension
7.6 x 380
mm
Max.
bundle Ø
102
kN
Minimum
breaking
load
0.55
Colour
Black
Units
Shipping
box
1000
2332 75 2
Item no.
0.500
kg/100 pc.
Weight
100
Units
Pack
isFang interception rod stand
Tripod stand for screwless installation of freestanding interceptor rods and insulated interception
rods with
plinths as well as threaded rods should be ordered separately.
isFang 3B-100
Type
mm
Dimension
B
1000
Ø mm
Dimension
D
40
mm
Dimension
L
—
mm
Dimension
H
—
5408 96 8
Item no.
620.000
kg/100 pc.
Weight
1
Units
Pack
isFang 3B-150 1500 40 — — 1 950.000
isFang-3B threaded rod
Threaded rod to fasten 1, 2 or 3 FangFix concrete bases with tripod stand. To mount the threaded
rods, the edge protection must be drilled.
isFang 3B-G1
Type
mm
Dimension
L
270
5408 97 1
Item no.
48.000
kg/100 pc.
Weight
3
Units
Pack
isFang 3B-G2 340 3 60.400 5408 97 2
isFang 3B-G3 430 3 76.600 5408 97 3
isFang support for wall mounting,
Fastening clip to fasten the insulated support pipes on the structure to be protected or on the
wall.
isFang TW30
Type
Ø mm
Dimension
D
40
mm
Dimension
L
30
5408 95 2
Item no.
62.000
kg/100 pc.
Weight
2
Units
Pack
isFang support for wall mounting,
Fastening clip to fasten the insulated support pipes on the structure to be protected or on the
wall.
isFang TW80
Type
Ø mm
Dimension
D
40
mm
Dimension
L
80
5408 95 0
Item no.
63.000
kg/100 pc.
Weight
2
Units
Pack
isFang support for wall mounting, 200−
Fastening clip to fasten the insulated support pipes on the structure to be protected or on the
wall.
isFang TW200
Type
Ø mm
Dimension
D
—
mm
Dimension
L
—
5408 95 4
Item no.
230.000
kg/100 pc.
Weight
2
Units
Pack
isFang support for pipe mounting, ø 100−
Tightening strap clip to fasten the insulated support pipes on the structure to be protected or for
construction-side pipes of ø 100–
isFang TR100
Type
Ø mm
Dimension
D
300
mm
Dimension
L
40
5408 95 6
Item no.
77.000
kg/100 pc.
Weight
2
Units
Pack
isFang support for pipe mounting, ø 40−
Fastening clip to fasten the insulated support pipes on the structure to be protected or for construction-
side pipes of ø 40–
isFang TS40-50
Type
Ø mm
Dimension
D
50
mm
Dimension
L
40
5408 95 8
Item no.
90.000
kg/100 pc.
Weight
2
Units
Pack
isFang support for pipe mounting, ø 50−
Fastening clip to fasten the insulated support pipes on the structure to be protected or for construction-
side pipes of ø 50–
isFang TS50-60
Type
Ø mm
Dimension
D
60
mm
Dimension
L
30
5408 96 0
Item no.
76.000
kg/100 pc.
Weight
2
Units
Pack
isFang support for corner pipe mounting, 50 x
Fastening clip to fasten the insulated support pipes on the structure to be protected or for construction-
side corner pipes of 50x
isFang TS50x50
Type
Ø mm
Dimension
D
—
mm
Dimension
L
30
5408 96 4
Item no.
82.000
kg/100 pc.
Weight
2
Units
Pack
电源标准
标准配置
标准配套
可选附件
标准证书